Barra de espaço
Barra de espaço

This tutorial describes a detailed procedure showing how to configure SNMP on a Cisco access point WAP 321.

YOUTUBE

In our channel you can view the video of this tutorial.



Open your browser, enter the default IP address of 192.168.1.245 access point to access the administrative Web interface.

access point cisco configuracao ip inicial wap321 2

When presented with the login prompt enter the following information:

  • Username: cisco
  • Password: cisco

 
By accessing the administrative interface, click on the SNMP menu, select the General option and configure the SNMP as shown.
access point cisco configurar snmp wap321 1



In our example, we set the read-only SNMP community VegetaRocks reading, and the read-write SNMP community VegetaRocks-RW. Also, the SNMP access has been released for all (ALL)

On a Linux computer, install the snmpwalk utility and test the SNMP configuration using the following commands.

# apt-get install snmp
# snmpwalk –v2c –c VegetaRocks 192.168.3.35


Note! Change the community name and the IP to reflect your network environment.

CONCLUSION

This tutorial presented the SNMP configuration process on a Cisco access point WAP 321.