Barra de espaço
Barra de espaço

This tutorial describes a detailed procedure showing how to configure SNMP on a Cisco access point WAP 4410N.

YOUTUBE

In our channel you can view the video of this tutorial.




Open your browser, enter the default IP address of 192.168.1.245 access point to access the administrative Web interface.

 

access point cisco configuracao ip inicial wap4410n 1

 

When presented with the login prompt enter the following information:

  • Username: admin
  • Password: admin

 
After accessing the administrative interface, click on the menu administraation and management.

access point cisco configurar snmp wap4410n 1

 

In our example, we set the SNMP community VegetaRocks and the SNMP access has been released for all (Any IP address)



On a Linux computer, install the snmpwalk utility and test the SNMP configuration using the following commands.

# apt-get install snmp
# snmpwalk –v2c –c VegetaRocks 192.168.3.35


Note! Change the community name and the switch IP to reflect your network environment.

CONCLUSION

This tutorial presented the SNMP configuration process on a Cisco access point WAP 4410N.